Sullage Hoses

Flat Out Sullage hose on Storage Reel

The Australian made Flat Sullage Hose, unique to FLAT OUT International, is made from heavy duty memory vinyl. Our unique flat sullage hose is made from 'memory' PVC, automatically expanding when unwound from the Reel. This hose has a 25mm internal diameter and comes supplied with two end plugs and a 25mm joiner. If you have a different size outlet you can plumb your own adaptation. We suggest taking it to the skirt of the van and finishing at a 45 degrees - this is the easiest for connection. We also supply an elbow to go over the edge of drain pipe.

NEW PRODUCT RELEASE - larger Diameter Sullage Hose for faster drainage of grey water (designed for shower vans). This 9m hose has an internal diameter of 32mm! Like the 25mm diameter hose, this product stores flat on the reel, automatically expanding when taken off the reel.

How to use:

When new:

Remove Sullage Hose from Reel, remove plugs, and lay hose in sun untill oval shape occurs. Now your Sullage Hose is ready to use.

To use:

Remove Sullage Hose from Reel, remove plugs and connect to vehicle, then lay in a fluent line to the drain. For convenience, the Sullage Hose can be cut in to two lengths, overlap 300 mm to wind on the Reel. Use the joiner to use the full length again. To pack up, plug one end, and place in the reel, then wind up and plug other end. there is now no seepage.